l33byt1980
Vendor
I need to find out some information.
I am uk based and we can order 2MB in X21 presentation.
I am doing two remote sites into a BGP cloud in Europe and France and Germany have provided us with RJ45 120 Ohm out put on their NTE,
Due to our offices being in the uk I had shipped to me 2 x x21 converters. However the circuits to not appear to come up or if they do they loose alot of pings considering.
I now G703 is unframed and X21 is framed, so my question is I believe I have a protocol error as I see this on show int s0/0/0
228 unknown protocol drops
Am I right in thinking that my G703 provided by our supplier will need to be matched at my Remote end.
Any help appreciated.
Lee
ACA - IPOffice implement
ACA - IP Telephony
CCNA - Passed at last
I am uk based and we can order 2MB in X21 presentation.
I am doing two remote sites into a BGP cloud in Europe and France and Germany have provided us with RJ45 120 Ohm out put on their NTE,
Due to our offices being in the uk I had shipped to me 2 x x21 converters. However the circuits to not appear to come up or if they do they loose alot of pings considering.
I now G703 is unframed and X21 is framed, so my question is I believe I have a protocol error as I see this on show int s0/0/0
228 unknown protocol drops
Am I right in thinking that my G703 provided by our supplier will need to be matched at my Remote end.
Any help appreciated.
Lee
ACA - IPOffice implement
ACA - IP Telephony
CCNA - Passed at last