Hi,
could you give me some hint.
I'm experimenting voice configuration with CISCO 1751 my IOS is version 12.3(6).
it seems that commands voice-port and dial-peer are not recognised by the router (in configure terminal mode).
when using voice-port I get <<% Invalid input detected at '^' marker>>
(I have installed I VIC FXS card on the slot 2 and I have the leds 'in use' on )
What could be wrong?
Michel
could you give me some hint.
I'm experimenting voice configuration with CISCO 1751 my IOS is version 12.3(6).
it seems that commands voice-port and dial-peer are not recognised by the router (in configure terminal mode).
when using voice-port I get <<% Invalid input detected at '^' marker>>
(I have installed I VIC FXS card on the slot 2 and I have the leds 'in use' on )
What could be wrong?
Michel