Cisco 1721 with ADSL WIC problems

[pday]

I am trying to hook up my new 1721 to a standard business enhanced SBC ADSL line. According to the debug info, the card is talking to the circuit (It displays Showtime! when it re-trains) but I can't get any traffic to pass on it. I can ping the SBC default gateway on the WAN side (not from the router) but not the IP address of my WAN side router. I have gotten all of the VPI and VCI info to create the proper PVC but still nothing. The router even shows the SBC router in it's ARP cache. Anyone know what I am missing? Thanks a bunch.


Patrick

 

[pc2mike]

Give us a clip of your config so we can look at it.

It sounds as though you have NAT mis-configured and your are either missing your access list or the ip nat inside / ip nat outside statements on the interfaces.

Mike