Hi All
I have a 1721 with a DS0 64K dedicated line installed and the LAN is on the builtin Eth0 interface. I am adding a WICENET and this will connect to a DSL Bridge/Modem. I have several implementation problems. Here is what I need to do:
Configure a DHCP server for 2 interfaces VPN and Eth0 (the previous DHCP server was on the previous DSL router)
Configure a MS IPSec VPN connection from a remote LAN thru the DSL bridge to the WICENET. Not mess up the Ds0 connection!!
Configure a Firewall and NAT on the WICENET interface for the LAN. I do not know where to start. Thanks for anything.
I have support from Cisco but my contact is unfriendly and condescending.
Ikester
I have a 1721 with a DS0 64K dedicated line installed and the LAN is on the builtin Eth0 interface. I am adding a WICENET and this will connect to a DSL Bridge/Modem. I have several implementation problems. Here is what I need to do:
Configure a DHCP server for 2 interfaces VPN and Eth0 (the previous DHCP server was on the previous DSL router)
Configure a MS IPSec VPN connection from a remote LAN thru the DSL bridge to the WICENET. Not mess up the Ds0 connection!!
Configure a Firewall and NAT on the WICENET interface for the LAN. I do not know where to start. Thanks for anything.
I have support from Cisco but my contact is unfriendly and condescending.
Ikester