Cisco 1720Nat and Public IP's

[RadioX]

Ok here is my scenario. I have a web server running exchange and some web sites. It is on a publically routed ip. My internal users are using DHCP with a 172.xxx.xx.xx class C of address'. How can I configure my 1720 so that I can use nat and broadcast the public IP so that external people can see my website and I can use my email server, etc. I know this is possible but I am more familiar with using all public addressing in my setups.

Thanks
Ron

 

[legion]

go to Cisco.com and in the search box type "configure router nat" and it will give you a step by step tutorial on how to config the NAT pool.

later, Greg