Dear all
Is there anyone who has a practical experience on Cisco 10k or/and the Juniper ERX1440 ?
According to Miercom , Cisco 10k is better than Juniper ERX1440 regarding the following tests:
1-Packet loss on a VoIP Priority Queue
2-Line rate on the OC-12//STM-4 atm Line module
3-Session Capacity ( 4x ) and call setup rate ( 10x )
4-Maximum number of sessins.(61000 PPP & 48000)
According to IPath technologies Juniper ERX1440 is better than the Cisco 10k WHEN YOU ENABLE QoS on Cisco 10k regarding the following points:
1-Session Setup Rate
2-Forwarding Performance
3-Subscriber Fairness
Many Thanx In Advance
Is there anyone who has a practical experience on Cisco 10k or/and the Juniper ERX1440 ?
According to Miercom , Cisco 10k is better than Juniper ERX1440 regarding the following tests:
1-Packet loss on a VoIP Priority Queue
2-Line rate on the OC-12//STM-4 atm Line module
3-Session Capacity ( 4x ) and call setup rate ( 10x )
4-Maximum number of sessins.(61000 PPP & 48000)
According to IPath technologies Juniper ERX1440 is better than the Cisco 10k WHEN YOU ENABLE QoS on Cisco 10k regarding the following points:
1-Session Setup Rate
2-Forwarding Performance
3-Subscriber Fairness
Many Thanx In Advance
