CIL won’t work – shows two same cil paths !

[Pabxer]

Hi !

We have very strange problem !

The result of FIDAP command in cil folder shows two cil paths with no files in it, although we initiated cil function on hdu .

This is what it shows :

<FIDAPATH=/SYSN/USR1/ACS/CIL,OPT=ALL,
FILE/DIRECTORY DATA

PATH : /USR1/ACS/CIL

PATH : /USR1/ACS/CIL
END


We had cil function working properly and we used to have files under one path before, but we noticed that although we programmed monthly files md110 didn’t create new file in June (although it did in May), that’s why we erased all cil programming and repeated it again, thinking if there was some error that appeared later, it will be so removed.
But, then this happened. Now CIL does not work at all and shows some two paths instead of one , as it used to before .

Do you have any idea how to solve this ?

Thanks

 

[VMPOP]

hello

print out this

FIDAPATH=/USR1/ACS/CIL/*.*;

if you find the files, it's ok, if not try removing the CIL and re-install it again,

Cheers ///

 

[patcher]

Something happened between HDU and NIU. Most probably you need to FIDIE:/SYSN/USR1/ACS/CIL; or reformat SYSSUBFS11 but not the SYSSUBFS21.

BLEQI:EQU=1-X-XX-X; NIU POSITION
FIMOE:SUBFS=SYSSUBFS11;
FIMOE:SUBFS=SYSSUBFS21;
IOSIE:NODE=SYSN,IODEV=SYSDISK1;
IOSII:NODE=SYSN,IODEV=SYSDISK1,SIPOS=3,SUBFS=SYSSUBFS11&SYSSUBFS21;
FIMOI:SUBFS=SYSSUBFS21;
FICRI:SUBFS=SYSSUBFS11,SIZE=64;
FIMOI:SUBFS=SYSSUBFS11;
BLEQE:EQU=1-X-XX-X;
DUSYI;

Then recheck if CIL is printing once path only. Then recheck later if call logging is writing file in it.