CIL on HDU faultcode NIU not allowed

[TJ79]

Hi,

I have some problems initiating CIL on HDU:

<CLDFI:FILE=CIL,PATH=/SYSN/USR1/ACS/CIL,USER=CIL-0;NOT ACCEPTED
NIU
NOT ALLOWED

any idea? CIL folder is mounted.

BR

 

[Monrovia]

IODDP; pls

IOEQI:EQU=XX-XX-XX-XX,IODEV=ABCD,USAGE=OUT;
CLOHI:FILE=ABCD,FORM=2,SMPSIZ=Y;
CLODI:FILE=ABCD;
CLDFI:IODEV=ABCD,FILE=GGGGGG,USER=CIL-X; (WHERE X IS NIU CIL PORT NUMBER)

are the commands to initiate cil

 

[doktor]

Hi

First you need a license for this!

Then:

Initiate a file or CIL - Call Information Logging.

FIDAPATH=/SYSN/USR1/ACS/CIL/*.*;
CLDFIATH=/SYSN/USR1/ACS/CIL,FILE=CILBUF,USER=CIL-2,PRIO=D;
CLOHI:FILE=CILBUF,FORM=2,DMPSIZ=4,DISCR=2;
CLODI:FILE=CILBUF;
CLTGI;

Print Commands:

FIDAPATH=/SYSN/USR1/ACS/CIL/*.*;
CLDFP;
CLINP;

Write out data:

FIFCPATH=/SYSN/USR1/ACS/CIL/CILBUF20090205,FORMAT=ASCII;;

Then it works...

///doktor

 

[kank]

Do you have another programmed CIL port on the NIU?
Try RFPUI:UNIT=CLP,LIM=1;

 

[kank]

Or try to restart the board (NIU) RFBOI:BPOS=x-xx-xx;

 

[makabuko]

Hi,
if you have some CIL output initiated in PABX via SIU card (EDFIP), you cannot make another CIL output via NIU. Mix SIU and NIU for CIL in one system is not allowed.