CIL FOR INCOMING 1

[viplex]

HI!

I HAVE MD110 BC12SP4.I HAVE SETUP CIL FOR INCOMING CALLS AND IT DOESN'T WORK;I SEE ONLY THE OUTGOING TRAFIC.
HERE IS THE PRINT OF CLINP;

<CLINCLINP;
CALL LOGGING DATA
CALL LOGGING MODE: ACTIVATED
MOBILITY LOGGING MODE: NOT ACTIVATED
HEADER FORM DMPSIZ DISCR IN SERVICE LOGABN LOGFAL HRTBT
LOGGER 2 1 0 YES NO 0 NO
ORIG DIAL TIME
500 -799 0 ALL
500 -799 9 ALL
500 -799 3 ALL
500 -799 10 ALL
T001001001-T001001030 ALL ALL
T003001001-T003001030 ALL ALL
DIR LIM BPOS EVENT


END

WHAT IS WRONG ? THANKS!

 

[lalrl]

You have route 1 and 3 and both are in LIM1?

Maybe orig=T.... only works, when A-Number of the external incoming caller will not be presented. Maybe then MD takes the trunk-ID ?!

Butrig=all must do it, if A-Number is presented

 

[viplex]

YES,I HAVE ROUTE 1 AND 3 IN LIM1; 50% OF INCOMING CALLS ARE THROUGH ONEBOX (WITH 4 ANALOG PORTS)AND THE OTHER 50% ARE DID;ALL INCOMING CALLS HAVE A-NUMBER PRESENTATION.

THANKS!!