CID from Cisco to nortel pbx.

[Scottyo42]

Have a nortel pbx connected to a ccm via qsig, can call both ways station to station and see info . can call out through the cisco over qsig then out through the nortel pbx to the PSTN. am getting restrict on the caller ID on the called side. ran a trace on the outbound d channel going to the pstn this is what i am getting.



DCH 3 UIPE_OMSG CC_SETUP_REQ REF 00001237 CH 61 23 TOD 9:33:38 CK 06EDD7DB
CALLING #:6203416713 NUM PLAN: UNKNOWN TON: NATL
CALLED #:6204817272 NUM PLAN: E164 TON: NATL

DCH 3 UIPE_OMSG CC_RELEASE_REQ REF 00001237 CH 61 23 TOD 9:33:52 CK 06EE48de. did a couple of traces

 

[KCFLHRC]

It looks like it's working to me. I have one set up the same way. QSIG to the Cisco and NI2 PRI's out the the PSTN in the Nortel. I had a complaint that the Caller ID was coming up unknown. Problem was not the PBX but the local carrier.