Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

cics verses Valcom V-2006a

Status
Not open for further replies.

MeMeMary

Technical User
May 8, 2009
19
US
CICs verses Valcom V-2006a Help Please and Thank u.Cant get the dang thing to page over speakers

Learn something new EVERYDAY
 
If the V-2006A/V-2006AHF is being used with a page
port, set SW6 Battery Feed to OFF (down position).
Page port must:
1. Provide dry page enable contact closure
2. Pass DTMF tones for zone selection
3. Pass audio in both directions when used with
V-2006AHF for handsfree talkback

OLD ROLMEN WORKING ON NORTELS AND AVAYA
 
You also need to use a CO/Trunk/Analog line port off the CICS. And program the Line to all phones you want to beable to Page. You don't use the page port.
 
Stick with what PERRYPJ is saying as you don't want to waste a line port for paging.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top