CICS AA

[silver987]

I have a CICS 7.1 I am trying to set up the built in AA. When I do F*833 to do recordings it says "try later" Haven't seen this before, any thoughts appreciated.

Wayne T

 

[curlycord]

Most likely it is not activated due to limited software edition.

Check your SP code under Maintenance then go here to see what exactly you have:

http://www.tek-tips.com/faqs.cfm?fid=6693

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[silver987]

The SP:30DHC12 NAT On the card: CICS - SIP FC NT7B66EF
It looks to me that prompts are enabled.

Wayne T

 

[curlycord]

Try making sure AA and/or CCR are ON first.
AA = F*831
CCR = F*832

Once they are ON maybe then F*833 (ADMIN) will be allowed

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[curlycord]

I probably should have said make sure those 2 are OFF not ON.
Try a reboot also if still an issue.


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[silver987]

Tried all that even did a startup, same s***

Wayne T

 

[silver987]

Changed s/w to a 4.0 I had laying around and all worked fine, changed it back to the 7.1 and got the same message again, must be the s/w card.

Wayne T