Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CICS 8x16 (Clid card) Low volume tel. lines...

Status
Not open for further replies.

bkdinstall

Technical User
Feb 19, 2007
4
CA
Hi all, my first problem is this!
- Low volume on C.O. lines (CLID cards) Reported tbl. to local provider (Telus) Tested ok.
-Swapped co cards (equip. 8 x 16)Tbl. remained.
-Put in new co card tbl. temporarily cleared.
-Tested ring voltage (incomimg to co .card) 52.2 volts.?Is this low ?should be closer to 70.volts?
-Have upped the c.o. to long c.o (line settings)
-What happens after these tests is ,when you adjust set volume ,your handset volume is so loud that you can't hear caller!
-This location is loud but not noisy. Retail counter..
-Could software be causing this (6.1sw was issue previously)
 
Wrong forum, you want the Norstar forum.




This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top