Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CICS 7.1
- Thread starter champ203
- Start date
norstarboy125
Vendor
does it say m7310 under maintenance port/dn status?
- Thread starter
- #3
jerryreeve
Vendor
Under software lower than 6.0 the 7310 was what you would see when a 7316 was plugged in (electronically it was identical as far as the systems were concerned) I thought the newer releases had changed that but it is no big problem.
----------------------------
JerryReeve
Communications Systems Int'l
com-sys.com
----------------------------
JerryReeve
Communications Systems Int'l
com-sys.com
RikRodgers
Vendor
I've never paid much attention to that particular field, but, as norstarboy125 asked, is it showing 7316 under port/dn status? If not, then your software isn't 7.1.
Another indicator, When you program a line appearance, does it come up on the top left button with the lcd field?
Another indicator, When you program a line appearance, does it come up on the top left button with the lcd field?
- Status
Similar threads
