guestworks
Technical User
On a CICS 1.0,I can only get 8 stations to work, the rest of the station ports only flash when sets are connected. Is this a limitation on the 1.0? Is there something in programming that needs to be turned on. Cheers!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CICS 1.0 , ONLY 8 STATIONS ACTIVE
- Thread starter guestworks
- Start date
- Status
curlycord
Programmer
They are both right!
You can purchase a key code which will activate 8 more phone ports and allow you to put in a C.O. card for 4 more lines to bring you up to 8X16 and if you need more phones after that then you will need the Services Cartridge to allow another 8 ports to bring you up to the max (8x24).
You can purchase a key code which will activate 8 more phone ports and allow you to put in a C.O. card for 4 more lines to bring you up to 8X16 and if you need more phones after that then you will need the Services Cartridge to allow another 8 ports to bring you up to the max (8x24).
- Status
Similar threads