i have a request to setup a few HP4000's with 2 additional bins per printer... any suggestions on how to set them up to allow choosing between bins2,3 & 4 (bin1 being manual feed)? i've setup spoolers with upper & lower, but don't remember or maybe never did set them up for the additional bin. need tags other than "-o[lb,ub,lower,upper,manual]"...
-no tag goes to bin4 (very bottom)
-oub goes to bin2
-olb goes to bin4
...and suggesting removing paper from bin4 to force it to print in bin3 didn't produce a happy user response
-no tag goes to bin4 (very bottom)
-oub goes to bin2
-olb goes to bin4
...and suggesting removing paper from bin4 to force it to print in bin3 didn't produce a happy user response