Chnge nubmer ring

[mh123]

Dears;
I have Nortel: CS1000 (Meridian) systems i need change number ring after 10 ring forward no answer to another number. How?

 

[Firebird Scrambler]

You need to log into LD 21 and print off the RDR settings. Look for the following pointers below.

RDR_DATA
OPT CFO CFRA DSTD PVCA CWRD
FNAD FDN
FNAT FDN
FNAL FDN
CFTA NO
CCFWDN
CFN0 4
CFN1 6
CFN2 8
DFN0 4
DFN1 6
DFN2 8
DNDH NO
MDID NO
NDID NO
MWFB NO
TRCL 0
DFNR 0
CRT0 00 00 00 00
CRT1 00 00 00 00
CRT2 00 00 00 00
CRT3 00 00 00 00
DAY0
DAY1
DAY2
DAY3
HOLIDAY0
HOLIDAY1
HOLIDAY2
HOLIDAY3

You may already have one of them set to 10 rings?. If not then change one of the 3 settings as CFN0 and DFN0 are matched as RCO 0 as is CFN2 and DFN2 = RCO 2 etc against the extension DN in LD 15.

Finally check / chsnge the DN RCO prompt to be either 0 1 or 2 as per RDR.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[DFKSydney]

A word of warning..... If you set the forward value to 10 rings for your incoming external calls, you are running a good chance of the call experiencing network timeout (the carrier drops the call) before the forward takes place.

 

[nessman]

Or the caller hanging up after 5-6 rings (a lot of folks are accustomed to voice mail after 4 rings these days - that if you don't pick up by then, then they assume no-answer and hang up).