VMware Workstation 5.5.2
Host O/S: Windows XP SP2 (plus all additional hotfixes)
Guest O/S: Windows XP SP2 (plus all additional hotfixes)
Although i'm able to install the above VPN client, on reboot the service fails to start with the following errors in the Event Log:
"FWBootLoad: failed to read file \??\C:\WINDOWS\System32\default.bin.!"
"FWSetDefaultPolicy: failed to load default policy from C:\WINDOWS\System32\default.bin!"
"Boot Security not enforced!"
I'm using bridged networking.
I've setup several other VMs each with a different VPN client (CISCO, NORTEL, SONICWALL etc) with no problems. Is there something special required for the CheckPoint Client.
PS: I'm trying to use Client R56 Build 615 (if that makes a difference)
This works fine when run directly on the Host PC. Any ideas??
Host O/S: Windows XP SP2 (plus all additional hotfixes)
Guest O/S: Windows XP SP2 (plus all additional hotfixes)
Although i'm able to install the above VPN client, on reboot the service fails to start with the following errors in the Event Log:
"FWBootLoad: failed to read file \??\C:\WINDOWS\System32\default.bin.!"
"FWSetDefaultPolicy: failed to load default policy from C:\WINDOWS\System32\default.bin!"
"Boot Security not enforced!"
I'm using bridged networking.
I've setup several other VMs each with a different VPN client (CISCO, NORTEL, SONICWALL etc) with no problems. Is there something special required for the CheckPoint Client.
PS: I'm trying to use Client R56 Build 615 (if that makes a difference)
This works fine when run directly on the Host PC. Any ideas??