Check trunk groups Hipath4000

[jnzy111]

Hello,

Does anyone know how to display trunk group information on a Hipath4000 ?

Either through Amo or Assistant?

Thanks!

 

[Iamnothere]

Dis-BUEND;

 

[jnzy111]

Thanks!!

 

[jnzy111]

Ok, my problem now is that looking at my trunk 15, it only contains 1 PRI circuit located at pen 1-01-013-0.

A second Pri has been added into Pen 1-02-019-1

How can I alocate a second pen into my trunk group 15?

See output below...

DISPLAY-BUEND:TGRP=15;


+------------------------------- FORMAT = L -----------------------------------+
| TGRP NUMBER : 15 TGRP NAME : S2 ASTERISK MAXIMUM NO. : 60 |
| CHARCON : NEUTRAL |
| SUBGROUP NO.: 25 DEVICE TYPE : S1CONN TRACENO : 0 |
| SEARCH MODE : CIRCULAR ACD THRESHOLD : * |
| NUMBER OF ASSOCIATED ROUTES : 6 PRIORITY : 2 |
| TDDRFLAG : ON TDDRTHRESHOLD: 2 SOURCEGROUPIDX : 1 |
| GDTRRULE : 0 ACDPMGRP : 0 |
| THE FOLLOWING TRUNKS (LTG-LTU-SLOT-CCT) HAVE BEEN ALLOCATED: |
+------------------------------------------------------------------------------+
| 1- 1- 13-0 1 | 1- 1- 13-0 2 | 1- 1- 13-0 3 |
| 1- 1- 13-0 4 | 1- 1- 13-0 5 | 1- 1- 13-0 6 |
| 1- 1- 13-0 7 | 1- 1- 13-0 8 | 1- 1- 13-0 9 |
| 1- 1- 13-0 10 | 1- 1- 13-0 11 | 1- 1- 13-0 12 |
| 1- 1- 13-0 13 | 1- 1- 13-0 14 | 1- 1- 13-0 15 |
| 1- 1- 13-0 16 | 1- 1- 13-0 17 | 1- 1- 13-0 18 |
| 1- 1- 13-0 19 | 1- 1- 13-0 20 | 1- 1- 13-0 21 |
| 1- 1- 13-0 22 | 1- 1- 13-0 23 | |
+------------------------------------------------------------------------------+

 

[Iamnothere]

Your trunk group 15 is set to support a maximum of 60 channels. In the USA, each PRI circuit contains 23 B-channels; therefore you should be able to add the second circuit to trunk group 15 simply by entering "15" in the parameter "TGRP" in AMO TDCSU.