Cheat sheet for upgrade steps?

[Gus63]

Does anyone have a cheat sheet with the steps of upgrading a R5.0.20 500V1 to the current 9.1 platform?
I know that some of the software needed to be stepped up as you upgraded. I just don't know the steps like if you are at 5.0 before you load 7.1 you needed to be at 7.0 and so on. Does anyone have a sheet like that telling me which to load first?
Thanks

 

[Ekster]

If you look at the release notes for the version you are upgrading to, there will be an upgade section witha table detailing which version you are going from/to and the steps required.

+++ Divide By Cucumber Error. Please Reinstall Universe And Reboot +++

 

[Gunnaro]

500V1

First you need to buy a 500v2 chassis (and possibly new cards), 500v1 can only go up to R9.0.x

Kind regards

Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam

 

[Westi]

Gunnaro is right it only works on V2 chassis but in case you get a V2 to upgrade
the cheat sheet is called Tech Bulletin and it is always the one for the GA release I found that is best for me.

they usually tell you what steps to take between what release to get to the current one.

Platform   Current Release      Upgrade Step 1        Upgrade Step 2
[COLOR=#EF2929]IP500v2[/color]    8.1.0.0 and earlier  Load 8.1.1.0 or 9.0   Load 9.1

how to get to 8.1.0.0 you ned to look in the Tech Bulletin for that release

Joe W.

FHandw, ACSS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter

 

[Gus63]

Thanks for setting me straight on that.

 

[Gunnaro]

No problem
Strangely enough you can order R9.1 upgrade license for a 500v1 dongle, but never make full use of it unless swapped to a SD card.

What cards / modules do you have on your system?

Kind regards

Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam