Its been 11 years since I have had anything to do with trunking an nec 2400, this one is a fairly new ipx2400, and they are changing everything over to 2 PRI's. They currently run everything over copper lines, and have DID's coming in through 8tltr cards, these will all be shifted over to the PRI's....I just need some help remembering everything that I need to do, its slowly coming back to me, but I need this done by next week... Any hints or ideas or things I should look for that can help will be much appreciated....
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Changing to PRI trunks on NEC IPX2400
- Thread starter doeswhat
- Start date
belevedere
Instructor
There are quite a few commands involved.
ARTD
ARSC
ATRK
MBRT
ARRC
ARNP
AMND
ACIC1
ACSC
ADPC
ASYD
AFRS
AOPR
And switch settings on the card.
If you do not have an ISDN manual, try to get one. It will help.
ARTD
ARSC
ATRK
MBRT
ARRC
ARNP
AMND
ACIC1
ACSC
ADPC
ASYD
AFRS
AOPR
And switch settings on the card.
If you do not have an ISDN manual, try to get one. It will help.
- Status
