I need to change two norstar system to 4 digits in order to do proper routing through a point to point, on one system I will just change the DN lenght to 4 digits making the starting DN 2221 this system is running xc 6.1 and on the other system I believe I will have to do a fresh installation and do everything all over to change the DN to something else other than 2221, like 4221 or 5221 or 5501 as my starting DN so that I have no problems when I make calls from site to site, my question is what should I watch out when I do the fresh installation on my second system which is running xc 5.0? What should I becareful on? what problems can I expect with the NAM 4.0? what other problema should i watch out for? Thank you for your help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
changing to 4 digits questions
- Thread starter jr6674
- Start date
voice mail will need to be reconfiged from scratch if you are going to go from 3 digit to 4 digit ext on a working system
Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com
Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.
Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com
Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.
- Status
Similar threads
- Locked
- Question
