Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CHANGING THE NAME ON A DISPLAY

Status
Not open for further replies.

adh111681

Programmer
May 10, 2001
97
US
How do you change the name on the display so that the name of the person will show up on an option 11C?
 
Kim..

LD 95

REQ CHG. . .(or NEW or OUT)
TYPE NAME
CUST 0
Carriage return through each prompt until
DN (enter the extension number)
Carriage return until
NAME (Enter the new name)
Carriage return through to
REQ.

Colin
 
Can you change the limit of allowable characters for the first/last name on the phone display? I see XPLN but I can't find a way to modify that.

Thanks.
 
out the old name first then new the new name and the limit will automaticaly match

ld 95
req: out
type: name
DN: --> enter the dn to out the name

req: new
type: name
DN: --> enter the dn for the new name
Name: --> enter the new name

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top