Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Changing the backcolor of "Print preview" window
- Thread starter pedross
- Start date
Mike Gagnon
Programmer
pedross
Since the "print preview"'s original intention is "here is what your report will look like is you print it", you could place a colored object over the whole report. But it will also print that way unless you could for it not to print.
Mike Gagnon
If you want to get the best response to a question, please check out FAQ184-2483 first.
Since the "print preview"'s original intention is "here is what your report will look like is you print it", you could place a colored object over the whole report. But it will also print that way unless you could for it not to print.
Mike Gagnon
If you want to get the best response to a question, please check out FAQ184-2483 first.
- Thread starter
- #3
Mike :
It wasnt quite that I had in mind...
not the "paper" in the "Print Preview" window, but the backcolor of the window itself.
the window backcolor is a kind of "dark grey", i was thinking in change the color to, lets say, the windows button color.
It wasnt quite that I had in mind...
not the "paper" in the "Print Preview" window, but the backcolor of the window itself.
the window backcolor is a kind of "dark grey", i was thinking in change the color to, lets say, the windows button color.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
