Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Changing Skill priority
- Thread starter ACTD
- Start date
PhonesAllDay
Technical User
(I haven't tried this) but you could - Duplicate one of your vectors so you have a test vector and then use the Import Data tool in ASA:
Select Object: Vector
Change Command
On line 1 enter in your test vector number and then scroll to the "Vector Steps" and then click the down arrow and it brings up a new table, use the drop down and select "check" then in the Check Skill Priority enter in Medium.
Press Ok, then the Save icon then the lightning bolt and see if your change is successful from High to Medium on your test vector number.
Good luck!
Select Object: Vector
Change Command
On line 1 enter in your test vector number and then scroll to the "Vector Steps" and then click the down arrow and it brings up a new table, use the drop down and select "check" then in the Check Skill Priority enter in Medium.
Press Ok, then the Save icon then the lightning bolt and see if your change is successful from High to Medium on your test vector number.
Good luck!
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question