I've been searching but can't find what I'm looking for. We are currently running v4.5 but will be upgrading to 7.5 next month. I recall several months ago when I was researching changes to 7.5 that there was a new command to convert set types, like from a 2616 to a 3904 without using custom scripts in Procomm. Can anyone confirm if v7.5 has this capability, or if I have to continue to out and rebuild to upgrade these phones?
On a related note, one of our sister facilities is going through the upgrade process now, and claims the upgraded fried a ton of their 3904 phones. The phone comes up with a phone and an X through it on the display. They are going to toss the lot and replace with new. Could this just be a firmware issue with the new PBX version, and it must be pushed out to these older 3904s?
On a related note, one of our sister facilities is going through the upgrade process now, and claims the upgraded fried a ton of their 3904 phones. The phone comes up with a phone and an X through it on the display. They are going to toss the lot and replace with new. Could this just be a firmware issue with the new PBX version, and it must be pushed out to these older 3904s?
