Changing outgoing CLID on all calls

[AC427]

Hi,

How do i change what number is being displayed on outgoing CLID. This is on an Option 11 running Rel 25.

Currently my service provider shows the main number which is the first number in the DDI range and is also the main billing number. I now want to display a different number on outgoing CLI. The number i want to display is part of the DDI range, but the service provider said if they were to do it they would need to completely rebuild the ISDN 30 and reconfigure the line from scratch.

Can i make a change somewhere in the switch to display the required number instead?

Regards

 

[bigindian65]

ld 17 clid entry 0

Mato' Was'aka

 

[AC427]

Ok, i have found that and it is option 1, but where are the differant options configured then?

Cheers

 

[spunkysus]

Do you have PRI circuts? If not you will probably have to get this changed at the carrier level.If you have PRI circuits and is controlling what number you send out you can try the above submission with ld 17 and then make a test call to your cell and see if the new number displays on outbound calls.

 

[drcook]

Is the CLID prompt in you Config set to YES.
To check go to LD 22.

REQ prt
TYPE parm
them check that CLID=Yes
if NO goto LD 17

REQ chg
TYPE parm
enter, enter, enter until the CLID prompt enter YES

HNTN -- NPA AREA CODE
ESA_HLCL -- NXX Used for E911 ESA Calls
ESA_INHN -- Insert NPA for ESA 911 Calls (y/n)
ESA_APDN -- Insert DN for ESA 911 Calls (y/n)
HLCL -- NXX for normal calls
DIDN -- Insert DN for normal Calls (y/n)
HLOC -- HOme Location COde
LSC -- Local Steering COde
CLASS_FMT DN -- DN Format to present to analog CLASS sets

 

[AC427]

bump

 

[AC427]

i have changed the parm CLID to yes in LD 17 and have the following set up as well, but i am still getting the main number of the DDI range as CLID which the service provider is sending.If both the option 11 and the service provider is sending CLID, which will override the other?

REQ prt

TYPE parm


PARM
LPIB 192
HPIB 32
500B 16
DTIB 35
DTOB 35
NCR 200
MGCR NULL
CSQI 020
CSQO 020
TUBO NO
CFWS NO
PCML A
ALRM YES
ERRM ERR BUG AUD
DTRB 100
ABCD NO
TMRK 128
FCDR NEW
PCDR NO
TPO NO
TSO NO
CLID YES
DUR5 NO
MLDN YES
MARP YES
FRPT NEFR
DCUS NULL
DTDT NO
MSCL 260
PMSI
MANU PMS1
PMCR 20
PORT NONE
NDIS 20
OCAC NO
MTRO MR
SBA_ADM_INS 001
SBA_USER 010
BCAP SPEECH
NORTEL_BRAND NO

ENTRY 0
HNTN 02392
HLCL 4716XX (there are numbers here, just being safe)
DIDN YES
HLOC
LSC

ENTRY 1
HNTN 02392
HLCL 4716XX
DIDN YES
HLOC
LSC

Cheers

 

[tnphoneman]

Carrier may not have the entire DID range in the screening table. Therefore you are being over ridden by the CO. They need to allow you to send the DID number.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.

 

[tnphoneman]

Turn on your Dchannel messageing and watch to see what you are sending. If you are sending the correct number contact your carrier.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.