We have 5 - T7316E Nortels on our phone system with two outgoing numbers, is there a way to change the outgoing number to the other one when programming the memory buttons, the reason I am asking is we have been informed that we can get cheaper outgoing calls if we use the other number but I am unable to see hows its done with the user card we have.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Changing out going call number on T7316E
- Thread starter Philiom
- Start date
curlycord
Programmer
If you mean you set is programmed to grab a line from the pool then the line needs to be removed from the pool and the set told which pool to use or remove prime line and just select the line you need to.
This is technician programming and why it's not on a user card.
Until you get a tech in just press the line you need to dial out, dial your number then pickup the handset from the cradle when needed.
________________________________________
Add me to LinkedIN
=----(((((((((()----=
Toronto, CAN
This is technician programming and why it's not on a user card.
Until you get a tech in just press the line you need to dial out, dial your number then pickup the handset from the cradle when needed.
________________________________________
Add me to LinkedIN
=----(((((((((()----=
Toronto, CAN
- Status
Similar threads
- Locked
- Question