Has anyone had to change the IP addresses to Meridian Max and Link before? And does your CCR also have an IP address? Our site is changing IP addresses completely and I have never performed this on Max, Link or CCR - any help would be appreciated - or if someone could point me to the right direction in the NTPs that would be great also - THANKS!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Changing IP Addresses on Meridian Max and Link - HELP??
- Thread starter Ravenlc
- Start date
0n Max it depends of the release, if it is easy !
You need Maint Access !!!
Max 7 and up do the following :
- Shutdown Max
- go to Maint / there you're able to change now IP, Subnet and Gateway
On Meridian Link, when changing IP, Gateway and subnet you need at least distech login !
You've to chg the IP parameters by editing textfiles in unix
for example with the integrated editor vi
If you didn't have the password, contact your provider !
You need Maint Access !!!
Max 7 and up do the following :
- Shutdown Max
- go to Maint / there you're able to change now IP, Subnet and Gateway
On Meridian Link, when changing IP, Gateway and subnet you need at least distech login !
You've to chg the IP parameters by editing textfiles in unix
for example with the integrated editor vi
If you didn't have the password, contact your provider !
- Status
Similar threads
- Locked
- Question
- Locked
- Question