Changing intercom button assignments 1

[LaserSaver]

We have a Vodavi starplus digital phone system and have made some changes in the office. Until now, the left 9 buttons of the executive phones have been station numbers 100-108 for transferring calls, intercom to that station etc.

I would like to change those intercom assignments to a custom list. i.e. button 1 to station 106, button 2 to station 110 etc.

Anyone know if this is possible. The only thing I can find in the manual is how to assign those flexible buttons to intercom/ DSS buttons- which they already are.

Thanks in advance.

 

[nfcphoneman]

1. Press SPEED twice.
2. Press the button to be programmed.
3. Dial the desired station number. A confirmation tone will sound.
4. Press the ON/OFF button.

http://www.jacksonvilletelephone.com

Jacksonville Florida Telephone Systems

 

[LaserSaver]

That was fast!

Thanks nfcphoneman!

Do you know if there is a way to do this as a system wide change or is a station by station change?

 

[nfcphoneman]

The only way it can be done on a system wide basis is via Installer level programming. If you're not familiar with that, then you run a high risk of messing something else up. You're much better off doing it station by station.

http://www.jacksonvilletelephone.com

Jacksonville Florida Telephone Systems

 

[LaserSaver]

Thanks again.

I've done some simple system programming over the years but since we don't have many phones, your way is easier and safer so I'll stick to it.

All the best.