81C/Succession 3.0. I have been requested to change the b channels currently being used to connect to one of the remote offices. Currently I'm on bch 7-11 with Dch on 23. Mike would like me to be on 17-20. Having come from the military where we don't mix data and Voice I'm somewhat at a loss. Any words of wisdom?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Changing B Channel assigments
- Thread starter sfcstroud
- Start date
prt the tnb in 20, go dis dch x in 96 disl x in 60, go to 14
out 5
type tie did or whatever then enter the 1st x 7.. then new 4 enter x 17, reenter the prompts and the switch will build back the 4 channels.. then ld 60 enll x, the d will come up on auto restore.. of course, that has to be done at the other end as well
john poole
bellsouth business
columbia,sc
out 5
type tie did or whatever then enter the 1st x 7.. then new 4 enter x 17, reenter the prompts and the switch will build back the 4 channels.. then ld 60 enll x, the d will come up on auto restore.. of course, that has to be done at the other end as well
john poole
bellsouth business
columbia,sc
because pri is so cheap now, very few users need drop and insert, they are uaually 23 plus 1 voice or data.. the only way to move your b's is to out them and put them back, the logical application has to be disabled 1st.. of course traffic will drop..
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Thread starter
- #5
- Thread starter
- #7
- Status
Similar threads
- Locked
- Question
- Locked
- Question