CHANGING ATT and LDN_DATA

[LubbTech]

I currently have DN 2200 on LDN0 and would like to have my outcalling caller id to show 2100. Is there a way I change that without changing my current LDN0? Also I have a CLID built but I'm not sure how to make the Attendant console use a specific CLLID entry. Any help would be appreciated.

 

[vztech]

The clid table is what's going to show on your calling id not LDN.

 

[LubbTech]

Hey vztech I understand that the CLID table shows my calling id, but can you assign a specific CLID entry to the autoattendant (M2250 Console)?

 

[bpg1]

hi lubbtech

NO,cange ldo to 2100 and ldn1 to 2200

 

[vztech]

Lubbtech

Note to sure about that. why would you want the console to send out ID does he or she make many calls?

 

[LubbTech]

My problem is that my DID range is from 2100-2199, 2100 is my main number built as an ACD pointing to my MerMail. So I do not want to put 2100 on ldn0. I have modified my clid table which shows enrty 0 as 2100 and entry 1 as the station DN. I went back and modified my stations to use entry 0. I quess my question still stands, is there anyway to make the attendant console use a specific CLID entry?
Problem is resovled but I would still like to know if there is any way to make the attendant console use a specific CLID entry.
Thanks,