Changing a line from type 500 to type 2000

[hd2004]

A user is moving to a workstation where there is an analog line and he is keeping his existing phone which is a 2006. How do I change the line from an analog to a digital?

 

[coniglio]

you will have to find an available digital TN in your switch and then punch the digital TN down to that jack.

 

[hd2004]

So you're saying I have to make a physical wiring change, correct?

 

[jag1046]

I thought 2006's were analog only?

 

[coniglio]

they're digital as far as I know.

 

[coniglio]

and yes, you will have to change the wiring

 

[jag1046]

So they are dual?

500 is analog yes?


Bill

<<<<< Hi I'm a telephone technician running a test on your telephone lines. To complete the test please dial nine (9), zero (0), pound sign (#) and hang up. >>>>>

 

[coniglio]

500 is analog. An M2006 set is digital, and thus needs a digital TN. If there are such things as analog M2006 sets I am not aware of them. Of course, you can simply try building your M2006 on an analog TN and if it's not compatible you'll get an SCH code.

 

[johnpoole]

2006 is a digital single line station. you'll need to find his new jack and run a jumper to his present tn. (you can do it, just think of it as a real skinny patch cable)

john poole
bellsouth business
columbia,sc