Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changes

Status
Not open for further replies.

bschoelkopf

Technical User
Jan 17, 2014
6
US
Is there any person or company in the Pacific Northwest that still works on the SL/ST Meridian1 Systems? I need some help with a BARS/NARS change and adding a T1 line.

Thanks
Bill Schoelkopf
Centralia College
bschoelkopf@centralia.edu
 
I'm in the NW and will help if I can - drop me a line at 30n30w *gmail*com -
30n30w
 
I am trying to figure out if I can add a T1 PRI to our switch. The switch is a SL1/ST with a Meridian1 upgrade.
It is Gen 1511 and RLS 18.20. I have all the Loads I need except LD 96. Was there a different software package for ISDN?

Thanks
Bill
 
Go to LD 22 and do a SLT and see if it is there

OLD ROLMEN WORKING ON NORTELS AND AVAYA
 
If LD96 does not exist, then you will have to build this as a straight T1 - You will not get PRI features, but you will be able to dial out.

~~
Gene at GHTROUT.com
 
Wow....that's a relic!! I don't know what I'd do without LD 96......We must be spoiled with our rls. 4.5 and the big switch at 5.0.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top