Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change time on option 81

Status
Not open for further replies.

BK5426

Technical User
Jun 19, 2013
35
US
Hey all i dont have admin books but i thought to change the time on option 81c you go to ld 2 stad day month year hh mm ss
25 09 2013 16 00 00 ?
I keep getting error message any input thanks
 
After Rls 5.0 or 5.5 you have to use the second level password. What Rls is you switch?


If its not working, get a bigger hammer!

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
 
I am on the second level password. is the command right
 
Your post has it right.

The format used when setting time and date in Overlay 2 (LD 2) is this:

[tt].STAD dd mm yyyy hh mm ss[/tt]

(dd=Date; mm=Month; yyyy=Year; hh=Hour; mm=Minute; ss=Seconds)

~~
Gene at www.GHTROUT.com
 
Using your example, log in with your admin2 (or second level account) and issue:

ld 2
.stad 25 09 2013 16 00 00



Jason
Network Engineer, Cisco, Nortel, ShoreTel
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top