Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change Ringer on Merlin Legend

Status
Not open for further replies.

Comput3rGuy

IS-IT--Management
Feb 7, 2012
98
0
0
US
I have an admin buidling with lots of large Cubicals (4 to 6 ppl per cubical) They are requesting to have distinctive rings so if they are at the Copier they can tell if the ringing phone is for them... Merlin Legend system....thanks
 
There are a total of 8 Ringing Patterns to select from. Since you say "lots of large Cubicals...." there is always the chance for a bit of overlap. That is, a Phone using Ringing Pattern 2 in Cubical A, could be confused with another extension with the same pattern in Cubical B. I think you can see where this could go.

Either way, the best thing to do is set it up and see.

At an extension, press FEATURE ZERO ZERO, then Press a LINE BUTTON (Or an Intercom/SA Button) and then you can dial *32 to toggle through the 8 Patterns. (Pattern 1 is the "default".)





-merlinmansblog.blogspot.com
 
Thanks Merlin as usual thi sis very helpful!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top