BrentEaston
IS-IT--Management
How can I change the remote admin password for a Merlin Legend system? Is it possible to change it using WinSPM? Or does it have to be changed on site?
Thanks for the help.
Thanks for the help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Change Remote Admin Password
- Thread starter BrentEaston
- Start date
- Status
You must know the old password in order to change to a new one. You do not need to be on site to change it either. Log on to WinSPM, then open Standard SPM. Click "Password" and follow the instructions.
PS: Backup the system before you so this. Last time I changed my password, there was line noise, and it did not regoster properly, thus, I was locked out. And the only to revert to the old password is to either do a system erase, or a system restore, when you are locked out.
PS: Backup the system before you so this. Last time I changed my password, there was line noise, and it did not regoster properly, thus, I was locked out. And the only to revert to the old password is to either do a system erase, or a system restore, when you are locked out.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question