I need to change operator extension from 200 to 300. I renumbered 200 to 300. I am using 200 at a different location on a different port. The problem is if you call in and hit 0 on the auto attendent it still goes to 200. I think I missed a step to define 300 as the operator in programming or maybe I can't change it.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Change Operator Extension on Merlin Magix
- Thread starter pcabn
- Start date
in the voicemail you have a operator entry as well. Depending what voicemail there are different ways to program them
in Merlin Messaging there is a 0 / timeout option in the Auto Attendant programming
Joe W.
FHandw, ACSS (SME), ACIS (SME)
Interrupt the silence only if you improve it by saying something, otherwise be quiet and everybody will be grateful.
in Merlin Messaging there is a 0 / timeout option in the Auto Attendant programming
Joe W.
FHandw, ACSS (SME), ACIS (SME)
Interrupt the silence only if you improve it by saying something, otherwise be quiet and everybody will be grateful.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question