We recently removed the pbx and octel from an office and routed those extensions to a pbx and octel in another office. I need to change the node for the old office to allow my octel to route messages to the octel in the new office. The old office used 4 digit dialing and the new one uses 5 digit dialing. I can change everything on the node profile page except the "Number of Digits in a Mailbox". Is there anyway to make this change or do I have to delete the node and add it back with the new information.?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Change mailbox digits on a node 1
- Thread starter coachgt1
- Start date
-
1
- #3
Yes you do have to delete is that is the one thing that can't be changed.
You should just disable it and remove the routing from it before you delete it. It can take 5 hours to delete it so add the new one and then remove the old one later
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
You should just disable it and remove the routing from it before you delete it. It can take 5 hours to delete it so add the new one and then remove the old one later
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Thread starter
- #4
- Status
Similar threads
