Change IP address of SCO box

[polymath5]

Hi All,

I have a SCO 3.0 box I need to change the IP address on. We have a legacy app that connects to it via Telnet. I need to change it from our current address scheme of 192.233.3.1 to 192.168.10.1 both on a 255.255.255.0 mask. I inherited the old internal address range and am changing to DHCP for the LAN and want to have a normal private address range.

As I said, all we do with the box is telnet to it, so it's host file, etc, shouldn't be an issue (as far as I know). I just need to change the address so our workstations can find it in our new address scheme.

Thanks!

=============
Mens et Manus
=============

 

[kenred]

Hi

I think that the command you need is ifconfig, if you do a man on it it will tell you all about it.

We use sco 5 here and that is what we used a couple of months ago.

Hope this helps.

Ken

 

[polymath5]

Hi Ken,

Yeah, that was the command. Fortunatly, my assistant wound up doing the change. Talk about weird keyboarding to navigate around!

Thanks VERY much for your help with this!

=============
Mens et Manus
=============