change form 7 to 10 digit dialing 2

[WYREDAWG]

anyone know where this is changed at?

 

[WYREDAWG]

this is for an option 11c , load 22

 

[cmawbey]

try..The FLEN length may need adjusting as to accommodate the extra digits Colin

 

[acewarlock]

Are all your local numbers going to change to 10 digits, no 7 digit dialing at all?


LD 90
PRT
CUST 0
AC1
NXX
>
>

This will print out all you local Nxx's, if they all go to the same RLI than go to

LD 86
PRT
DGT
>
>
Look at this to see if you have a DMI that INSERTS the NPA for you location. if you dont have one then you will need to make one, pick a number after the last one printed. after you make the new DMI then do.



CHG
RLB
> until you get to DMI
DMI? put the number of the RLI you printed from the Nxx's
>
>

now you can dial 7 digits for local call and the switch will put in the NPA

 

[Reusser]

you could also just add your npa and tell all users to start dialing all digits

If your area code is say 206

LD 90
Req: CHG
Feat: net
TRAN: AC1
TYPE: NPA
NPA: 206 <-- enter your area code here with out the 1
RLI: <-- enter the same rli as what is assigned your NXX