Working in postscript. I need to be able to change the font and/or size on a centered line and keep it centered. For example: on a business card the name line might include the degree title "John Doe, MDS, MS, PhD (etc...). If the name is 11pt and the degrees are say 8pt, how can I change that AND keep the line properly centered? I hope that makes sense. Any help is appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Change fonts and sizes on centered text
- Thread starter wilfri
- Start date
theprogram
Programmer
Hello
Use command stringwidth to estimate the length of your text, and then calculate the x from left to have a centered text.
Do not forget the "pop" just after. (see in postscript cookbook)
Have a look at
cdy
Louis
Use command stringwidth to estimate the length of your text, and then calculate the x from left to have a centered text.
Do not forget the "pop" just after. (see in postscript cookbook)
Have a look at
cdy
Louis
- Status
Similar threads
- Locked
- Question