change color -depth and resolution (CDE)

[Mauric]

Hello Everybody,

i want change the color depth from 8 to 24bit on me Blade 100 machine
its runing with Solaris 9 (CDE), if i test with m64config its not working.

and its possible that i can only change on me blade only from 8 to 24 bit ? and 32 bit are not supportet ?!

please for any helps iam where happy

best regards
maurizio

--
SunOS blade 5.9 Generic_118558-11 sun4u sparc SUNW,Sun-Blade-100

# m64config -prconf
Possible depths: 8, 24
Current resolution setting: 1152x900x66
Current depth: 8

# m64config -depth 24
m64config: Board does not support resolution none
m64config: No changes made; use "nocheck" to force change

# m64config -depth 24 -nocheck
m64config: Option -nocheck is ambigous.

 

[Mauric]

i have found it

m64config -res 1152x900x66 -depth 24
and re run X = OK,

its possible to change this setting on other
place, for example from a file ?

and it's possible that i can't switch to 32, or its need a better vga card ?
>>Possible depths: 8, 24

Thanks in advance
Maurizio