change A-number internal call

[aau2]

Hi, How do I change sent number at internal calls?
At Alex in command NUTRI, says that with CNVTYP=4 do a inbound conversion, but it´s only for incoming call, but I want to change my sent number at internal calls.

Tanks

 

[dstrang1]

In BC13, you can assign an "additional number"....KSADCIR=, ADDNUM=;, or EXADCIR=, ADDNUM=;.

The additional number has to be already initiated in the extension number series in number analysis.

I dunno if this command exists in BC12 SP11, but I know it's not in SP10 and therefore not in any release previous to SP10.

Good luck,

Dave Strang

 

[whosrdaddy]

dave this is TSW (BC13) feature. it is to be used in combination with parallel ringing

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[whosrdaddy]

IMHO, the only way you can pull this off, is to use a loop.

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[aau2]

The version is BC12 Servicepack 8