Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Chagne IP of MGU
- Thread starter 91064
- Start date
Hi,
there are a couple of MGU related help docs at this link you might find helpful.
there are a couple of MGU related help docs at this link you might find helpful.
- Thread starter
- #3
Hi,
sorry about that, try this one-
sorry about that, try this one-
- Thread starter
- #5
Thanks
Planning to do like this:
Logon to PBX and ssh to MGU.
Set new nvparams for eth_o and eth_1 regarding ip and def_route.
Shutdown the MGU.
Move it and meanwhile change the addresses in MTS.
Start the MGU up.
And it should be up and running
Planning to do like this:
Logon to PBX and ssh to MGU.
Set new nvparams for eth_o and eth_1 regarding ip and def_route.
Shutdown the MGU.
Move it and meanwhile change the addresses in MTS.
Start the MGU up.
And it should be up and running
- Status
Similar threads
