Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Chaging Time
- Thread starter Cool007
- Start date
You should be able to do "SET TIME" is used on NetWare 3.11
Netware 4.11it would be.. SET TIME <MM/DD/YY> <HH:MM:SS> <AM or PM> <TIMEZONE (MDT MST, Etc.)>
I would review before you do it. Don't set it too far ahead. Also remember it has to be done on a Single Reference or Reference time server. Setting time from a Primary or Secondary time server will only result in unexpected results in the time being changed again if a difference in time is found on the next polling interval.
Hope this helps...
david e
*end users are just like computers, some you can work with...others just need a simple reBOOTing to fix their problems.*
Netware 4.11it would be.. SET TIME <MM/DD/YY> <HH:MM:SS> <AM or PM> <TIMEZONE (MDT MST, Etc.)>
I would review before you do it. Don't set it too far ahead. Also remember it has to be done on a Single Reference or Reference time server. Setting time from a Primary or Secondary time server will only result in unexpected results in the time being changed again if a difference in time is found on the next polling interval.
Hope this helps...
david e
*end users are just like computers, some you can work with...others just need a simple reBOOTing to fix their problems.*
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question