Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CFNA timers with SL1100

Status
Not open for further replies.

pmcook

IS-IT--Management
Apr 7, 2011
1,255
US
I did my first SL1100 the other day with InMail. I want to set up the AA to answer on 0 rings on night schedule and delayed ring on day. As far as I can see there is only one CFNA tier which applies to all routing boxes.
 
Make sure 12-01-01 is Manual Night Mode Switching checked.
Make sure 12-08 is set to “1 to 2”
In Program 12-07 Night Mode Name Setup enter “Night” in the field for Mode 2 (Until Firmware 5.0 the Night Button will not light, just change the name on the display. Without a name assigned to the mode you'll have no indication of which mode the system is in.)

If you are using the same Greeting for Day and Night, in 22-05 just put 102 (means Voicemail not extension 102 since those fields are normally 1-25 for ring groups not extensions) in the Mode 2 field for the trunks.

If you want a different greeting:
In Program 22-02 Incoming Call Trunk Setup change Mode 2 for all trunks from Normal to DIL.
In Program 22-07 DIL Assignment enter a Virtual Extension number. (11-04 lists your virtual extensions)
In Program 24-09 Call Forwarding Fixed Settings, for that Virtual Extension, set 24-09-01 Call Forward Type to Call Forward All Calls. Set all other fields in 24-09 to 3999 or whatever your voicemail pilot number is.
In Program 47-03 Inmail Group Mailbox Options change one of the group numbers to the Virtual Extension and change the Mailbox Type to Routing and the mailbox number to the routing mailbox you are using for night mode.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top