Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CF_Diag

Status
Not open for further replies.
Sooperbohl

Sooperbohl

Technical User
Mar 2, 2004
164
US
We have an Octel 250. Someone, during the boot sequence pressed cntl DD and put the system into CF_Diag mode. The prompt is CF_diag: How do you exit out of this mode. Typing help, the only option that looks like it will work is the boot command. It responds with Syntax: Boot !

Notsure what this is. Any help would be appreciated.

Soop
 
Sort by date Sort by votes
Aww thanks Ken.. I got it figured out. I appreciate your response

Soop
 
Upvote 0 Downvote
I had a working Octel 250, powered off, now when attempting to boot I get the following:

SCSI Disk Multi threading test .................... (63) STARTED
*63/1* No drive has been found, test stop
SCSI Disk Multi threading test .................... (63) FAILED ***
*** ERROR(s) OCCURRED ***

However both drives are present, did I loose a drive in this process?
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top