I just fininshed networking 2 BCM 400 4.0 at different locations. They are using centralized voicemail, I was able to get the message indicators to light up and dial the pilot DN and it does ask for my mailbox and passcode. The problem I have is the remote site would like to transfer calls to mail, when they press transfer and the Pilot DN it asks for mailbox and passcode. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Centralized mail over VOIP
- Thread starter 56BelAir
- Start date
You would need to assign a new target line with different digits to the express messaging line within each mailbox.
EX. X4201 is the DN/Mailbox, express message would be DN plus 300 so the user would transfer the call to 7201.
I can't think of any other way.
EX. X4201 is the DN/Mailbox, express message would be DN plus 300 so the user would transfer the call to 7201.
I can't think of any other way.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question