CDR option in RDB not changing

[BobColl]

when I try and change the CDR option in the RDB it will not change to YES can someone tell me what I am missing. I have the CDR_Data setup

TYPE CDR_DATA
CUST 00
CDR YES
IMPH NO
OMPH NO
AXID YES
TRCR YES
CDPR YES
ECDR YES
BDI YES
PORT 2
BCAP YES
CHLN 0
FCAF NO

 

[worldwidedialtone]

When you prt CDR in LD 21 it stays at CDR NO? If so look at your customer number, long shot guess but never hurts try with 0 vice 00 for Customer

 

[BobColl]

When I do the print I do not put anything in for the customer the system puts that in

 

[worldwidedialtone]

I understand, then in LD 15 CDR try just 0 for customer enter c
LD 15
REQ CHG
TYPE CDR
CDR DATA
CDR Yes then enter thru until REQ comes around again. Then go LD 21 PRT TYPE CDR and see if it took

 

[johnpoole]

check to see if you have all packages needed for cdr. build a tty with cty as user, after you answer cdr yes, enter the port number

john poole
bellsouth business
columbia,sc

 

[glynnmsg]

Try changing the following prompts in the route data block

CDR  [b]YES [/b]
INC  [b]YES [/b]
LAST NO
QREC [b]YES [/b] 
OAL  [b]YES [/b] 
AIA  [b]YES [/b]
OAN  [b]YES [/b]